Revision as of 15:59, 1 August 2018

CIRCLE(Xcoordinate, Ycoordinate, Radius)

CIRCLE (Width,Left,Top)

where,

CIRCLE() displays a circle for a specified radius from specified X and Y coordinates.

CIRCLE (Width,Left,Top)

Circles are simple closed curves which divide the plane into an interior and an exterior.
$Width$ and $Left$ can be positive or negative.
$Width$ and $Left$ can be omitted by using the function as CIRCLE(Radius).

1) =CIRCLE(30,50,200) : Displays a circle with X coordinate as '30', Y coordinate as '50' and radius '200'.

2) =CIRCLE(100) : Displays a circle with radius 100.

3) =ZC(1..50@CIRCLE) : Displays circles with radius 1,2,3...50 on a new Zcube.

4) =ZC(20..100..10@CIRCLE) : Displays circles in steps of 10 with radius 20,30,40...100 on a new Zcube.

@@ Line 1: / Line 1: @@
 =CIRCLE(Xcoordinate, Ycoordinate, Radius)=
+<div style="font-size:30px">'''CIRCLE (Width,Left,Top)'''</div><br/>
 where,
-*<math>Xcoordinate</math> represents the X coordinate point,
+*<math>Width</math> represents the X coordinate point,
-*<math>Ycoordinate</math> represents the Y coordinate point, and
+*<math>Left</math> represents the Y coordinate point, and
-*<math>Radius</math> represents the radius of circle.
+*<math>Top</math> represents the radius of circle.
 CIRCLE() displays a circle for a specified radius from specified X and Y coordinates.
 == Description ==
-CIRCLE(Xcoordinate, Ycoordinate, Radius)
+CIRCLE (Width,Left,Top)
 *Circles are simple closed curves which divide the plane into an interior and an exterior.
-*<math>Xcoordinate</math> and <math>Ycoordinate</math> can be positive or negative.
+*<math>Width</math> and <math>Left</math> can be positive or negative.
-*<math>Xcoordinate</math> and <math>Ycoordinate</math> can be omitted by using the function as CIRCLE(Radius).
+*<math>Width</math> and <math>Left</math> can be omitted by using the function as CIRCLE(Radius).
 == Examples ==