Difference between revisions of "Manuals/calci/COS"
Jump to navigation
Jump to search
| Line 48: | Line 48: | ||
| 10 || -0.83907152907 | | 10 || -0.83907152907 | ||
|} | |} | ||
| + | |||
| + | *1..100@["z^2",SIN,COS] will display the Square value, Sin and Cos value from 1 to 100 | ||
== Examples == | == Examples == | ||
Revision as of 06:18, 11 February 2020
COS(Number)
- Number is the angle value in Radians
- by default Calci use Radian as angle.
- COS() returns the cosine of the given angle
DCOS can be used if the angle is in degrees.
The angle can be a single value or any complex array of values.
For example COS(1..100) can give an array of the results, which is the COS value for each of the elements in the array.
- The array could be of any values either '+' or '-' like 1..5@COS or (-5)..(-1)@COS.
Description
Consider x = 60 then =COS(RADIANS(60)) gives 0.5000000000000001 that is approximate to 0.5
The above function gives the Cosine of 'x' in Degree.
- In a right angled triangle, COS = Adjacent side / Hypotenuse.
- COS function determines the Cosine of the given angle.
- By default, Calci takes the angle in Radians.
- To convert Radians to Degrees multiply with 180/PI() or we have to use the Radians function COS(RADIANS(x)) or DCOS(x).
- COS(RADIANS(90))= 6.123031769111886e-17 ie, approximately = 0. So for calculation we consider COS(RADIANS(90))=0
The following example shows how COS is applied to an array of numbers containing Angles 1..10.
1..10@COS
| Angles | COS |
|---|---|
| 1 | 0.54030230586 |
| 2 | -0.41614683654 |
| 3 | -0.9899924966 |
| 4 | -0.65364362086 |
| 5 | 0.28366218546 |
| 6 | 0.96017028665 |
| 7 | 0.75390225434 |
| 8 | -0.1455000338 |
| 9 | -0.91113026188 |
| 10 | -0.83907152907 |
- 1..100@["z^2",SIN,COS] will display the Square value, Sin and Cos value from 1 to 100
Examples
COS(x)
- x is the angle in radians.
| COS(Radian) | Value |
| COS(0) | 1 |
| COS(1) | 0.54030230586 |
| COS(90) | -0.44807361612 |
Related Videos
See Also
References