Units

How to specify units

Units are a unique, inherent and simple feature of the z^3 language.

Using units is simple and easy. For example:

a=1m;

indicates that a is now a variable containing the value of 1 meter. For more complex units we can enclose them in brackets as in 3(m/sec).

If a variable needs to be specified in specific units, simply use the <> operator. Such as: a<>(m/sec);

In z^3 language, <> is the unit conversion operator. Also, any arithmetic operator such as +, -, *, /, ^, % etc. should be enclosed within < and > to allow unit conversions to propagate through these operations. These conversion operations can be done on arrays as parameters also. Hence to add a meter to 2 centimeters, do the following: a=1m<+>2cm; and z^3 will give the answer: 102 cm.

Note, that this result now carries the units with it for further operations. For example: a=(1m<+>2cm)<^>3; gives the answer as 1061208 cm3.

To convert the current value of a variable to a different unit, simply use the <> operator: a<>cm;

Notice that if a already had a unit, it will be appropriately converted using the units. If it did not have units inherently, it will simply be given the units.

a=1

1

a<>cm;

1 cm.

a=1m;

1 m.

a<>cm;

100 cm.

In the second case, 1m is converted to 100cm.

Variables with units can be operated on with or without unit awareness. The unit aware operators are enclosed in angular brackets and are listed in Unit Operators.

<>()- Any multiunit indication should be in () to avoid confusion with normal code that may mean something else. For 1 meter/second, 1(m/s) or 1<>(m/s) should be used. 1m etc is enough if it is a simple unit.

Unit Prefixes

Similarly, scales such as milli, mega, etc. are supported using conventional SI units.

a=1m;

1 m.

a<>ym;

1.0000000000000001e+24 ym.

Here a now has the unit yoctometer.

Using uppercase Y, we get the answer in Yottameter.

a=1m;

1 m.

a<>Ym;

1.0000000000000001e-24 Ym.

These conversions of scale follow the SI unit prefix standards.

Metric Prefixes in Every day Use

Text	Symbol	Factor	Power
yotta	Y	1000000000000000000000000	10²⁴
zetta	Z	1 000 000 000 000 000 000 000	10²¹
exa	E	1 000 000 000 000 000 000	10¹⁸
peta	P	1 000 000 000 000 000	10¹⁵
tera	T	1 000 000 000 000	10¹²
giga	G	1 000 000 000	10⁹
mega	M	1 000 000	10⁶
kilo	k	1 000	10³
hecto	h	100	10²
deka	e	10	10¹
none	none	0	10⁰
deci	d	0.1	10^-1
centi	c	0.01	10^-2
milli	m	0.001	10^-3
micro	u	0.000 001	10^-6
nano	n	0.000 000 001	10^-9
pico	p	0.000 000 000 001	10^-12
femto	f	0.000 000 000 000 001	10^-15
atto	a	0.000 000 000 000 000 001	10^-18
zepto	z	0.000 000 000 000 000 000 001	10^-21
yocto	y	0.000 000 000 000 000 000 000 001	10^-24

Conversion among Unit Systems

z^3 supports conversion among unit systems, such as SI Units and FPS systems.

For example:

a=1mi;

1 mi.

a<>km;

1.6093439999999999 km.

Notice that the mi (miles) unit of variable a is converted to km.

Units on Array of Values

Units work on variables as simple numerical values or as arrays.

Let us consider numbers 1 to 10.

a=1..10;

Then say this is in miles.

b=a<>(mi);

Convert to kilometers.

b<>km

Numeric	Units	UNITSOF
1mi	km	1.6093439999999999km
2mi	km	3.2186879999999998km
3mi	km	4.828031999999999km
4mi	km	6.4373759999999995km
5mi	km	8.046719999999999km
6mi	km	9.656063999999999km
7mi	km	11.265407999999999km
8mi	km	12.874751999999999km
9mi	km	14.484096km
10mi	km	16.093439999999998km

We can convert arrays of Unit values to converted values as in the following:

a=(1..10)<>℃;

b=a<>℉;

Numeric	Units	UNITSOF
1℃	degF	33.8℉
2℃	degF	35.6℉
3℃	degF	37.4℉
4℃	degF	39.2℉
5℃	degF	41℉
6℃	degF	42.8℉
7℃	degF	44.6℉
8℃	degF	46.4℉
9℃	degF	48.2℉
10℃	degF	50℉

Units inside functions

Units can be highly effective inside functions. These, along with constants, provide a fantastic way to express your logic beautifully.

Let us consider how we can write E=mc^2. E:=(m<>kg)<*>(SPEEDOFLIGHT()<^>2);

E(2kg)

gives: 179751035747363520kg.m2.s-2

Note the use of <*> and <^> for the operators in unit operations.

In case you wanted to give the output in Joules.

E(2kg)<>J

gives: 179751035747363520J

Let us add variables intermixing miles and kilometer.

a=1mi;

b=10km;

[a,b,(a<+>b)<>mi]

1mi	10km	7.21371192237334mi

10mi<>km

can convert miles to kilometers.

Units Aware Internal Functions

In most sytems, functions like SIN operate on radians. Most users are unaware of this, and get confused when they get SIN(90) to be something unexpected.

With z^3 unit aware functions, this is not an issue.

For example,

a=90deg;

SIN(a)

will automatically convert the variable a into radians before calculations. To see the difference, try SIN(90) vs. SIN(90<>deg).

The answers given are: 0.8939966636005579 and 1.

Unit awareness is built into functions in z^3. (Note: Some functions are being transitioned).

Generation of Arrays with Units

rad2piby10

0㎭
0.6283185307179586㎭
1.2566370614359172㎭
1.8849555921538759㎭
2.5132741228718345㎭
3.141592653589793㎭
3.7699111843077517㎭
4.39822971502571㎭
5.026548245743669㎭
5.654866776461628㎭
6.283185307179586㎭

Note the results from rad2piby10 is automatically in radians.

Similarly array results using series in degrees are also marked with units of degrees.

deg110by10

0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
100°
110°

(rad2piby10)<>rad<>deg

Numeric	Units	UNITSOF
0㎭	deg	0°
0.6283185307179586㎭	deg	36°
1.2566370614359172㎭	deg	72°
1.8849555921538759㎭	deg	108°
2.5132741228718345㎭	deg	144°
3.141592653589793㎭	deg	180°
3.7699111843077517㎭	deg	216°
4.39822971502571㎭	deg	252°
5.026548245743669㎭	deg	288°
5.654866776461628㎭	deg	324°
6.283185307179586㎭	deg	360°

shows the series in radians converted to degrees.

Currency Conversions

z^3 can automatically convert currencies.

b=(100$<+>3020¢);

gives the result

13020 cent.

b<>$;

gives

130.2 dollar.

With internal and external mappings to currency conversion dates, z^3 is able to do international currency conversions also.

(100..1000..100)<>USD<>INR

Numeric	Units	UNITSOF
100USD	INR	6680.820948336871INR
200USD	INR	13361.641896673742INR
300USD	INR	20042.462845010614INR
400USD	INR	26723.283793347484INR
500USD	INR	33404.10474168436INR
600USD	INR	40084.92569002123INR
700USD	INR	46765.7466383581INR
800USD	INR	53446.56758669497INR
900USD	INR	60127.388535031845INR
1000USD	INR	66808.20948336872INR

We can override internal conversion rates by using SETCONVERSION.

SETCONVERSION(1<>euro,1<>dollar,1.1)

PRINTCONVERSION();

can give the recently set conversion rates.

1<>€<>$

gives 1 euro to convert to 1$.

SETCONVERSION(1$,1€,0.9);

shows the following on PRINTCONVERSION(): {

  dollar:euro: 0.9,
  euro:dollar: 1.1111111111111112

}

Adding currencies is demonstrated further below:

(100$<+>300¢<+>30¢)<>$

gives:

103.3 dollar.

Array Unit Normalization

If an array holds a set of values from varied units, UNITIFY can convert all of them to the same units.

UNITIFY([1cm,2m,3cm])

will give: 1cm 200cm 3cm

Likewise: SUM(UNITIFY([1m,2m,3mm]))

will give the answer:

3.003 m.

SUM(UNITIFY([1m,2m,3mm]))<>cm

will give answer in cm :

300.3cm

PMT(4%,12,1000$,1200¢,0)

gives the result as:

-107.35079875828919 dollar.

since PMT is a unit aware function.

A gallon is converted to liter below.

1gal<>l

3.7854117840000003l

A liter is converted to oz. below:

1<>l<>oz

33.814022701842994oz

Shown below are conversions to micro liters.

(1..10)<>l<>ul

Numeric	Units	UNITSOF
1l	ul	1000000ul
2l	ul	2000000ul
3l	ul	3000000ul
4l	ul	4000000ul
5l	ul	5000000ul
6l	ul	6000000ul
7l	ul	7000000ul
8l	ul	8000000ul
9l	ul	9000000ul
10l	ul	10000000ul

Unit Aware Logical Operations

Unit aware variables and arrays can also be operated on with Unit Aware Logical Operators and Unit Aware Mathematical Operators. Such operators are listed in Unit_Operators.

Is 1m greater than 1cm?

1m<>>1cm;

true

Is 1m greater than 1cm, and is 2m greater than 200cm?

[1m,2m]<>>[1cm,200cm];

Answer is:

[true, false]. Note that an array of answers is obtained here.

Is 1m greater than or equal to 1cm, and is 2m greater or equal to than 200cm?

[1m,2m]<>=>[1cm,200cm];

Answer is:

[true, true].

Is 1m less than 1cm, and is 2m less than 200cm?

[1m,2m]<<>[1cm,200cm];

Answer is:

[false,false]

Is 1m equal to 1cm, and is 2m equal to 200cm?

[1m,2m]<==>[1cm,200cm];

Answer is:

[false,true]

Is 1m not equal to 1cm, and is 2m not equal to 200cm?

[1m,2m]<!=>[1cm,200cm];

Answer is:

[true,false]

Is 1m less than 1cm, and is 2m less than 199.99cm?

[1m,2m]<<=>[1cm,199.99cm];

Answer is:

[false,false]

Is 1m less than or equal to 1cm, and is 2m less than or equal to 199.99cm?

[1m,2m]<<=>[1cm,200.01cm];

Answer is:

[false,true]

Also note that it is not necessary for both sides of these to be the same size. For example, the following is a check to see which all numbers between 1m to 10m are greater than 3m.

((1..10)<>m)<>>3m;

And the answer is:

false
false
false
true
true
true
true
true
true
true

The following is a check to see which all numbers in the series 0.1m, 1.1m, upto 10m are greater than 30cm.

((0.1..10)<>m)<>>30cm

((0.1..10)<>m)

Numeric	Units	UNITSOF
0.1	m	0.1m
1.1	m	1.1m
2.1	m	2.1m
3.1	m	3.1m
4.1	m	4.1m
5.1	m	5.1m
6.1	m	6.1m
7.1	m	7.1m
8.1	m	8.1m
9.1	m	9.1m

((0.1..10)<>m)<>>30cm

The answer is:

false
true
true
true
true
true
true
true
true
true

Types of Supported Unit Conversions

z^3 unit conversions cover a large number of units, and is highly flexible in handling new units that are not known.

Basic Conversions

The command CONVERT() gives the list of basic units supported within z^3.

MassUnits:g,sg,lbm,u,ozm,

DistanceUnits:m,mi,Nmi,in,ft,yd,ang,Pica,

TimeUnits:yr,day,hr,mn,sec,year,s,min,hour,

PressureUnits:Pa,atm,mmHg,

ForceUnits:N,dyn,lbf,

EnergyUnits:J,e,c,cal,eV,HPh,Wh,flb,BTU,

PowerUnits:HP,W,

MagnetismUnits:T,ga,

LiquidUnits:tsp,tbs,oz,cup,pt,qt,gal,l,

Prefixes:Y,Z,E,P,T,G,M,k,h,e,d,c,m,u,n,p,FValue,a,z,y,

Others:rad,deg,F,C,K,dollar,euro,cent,rupee

Any custom user supplied conversions would also be listed.

Derived Conversions

The command SUPPORTEDUNITS() gives the list of derived and related units supported by z^3. More details are given in Derived Units.

Behavior on Unit Conversion Failures

In general, if a conversion fails, the original value with units are returned. This behavior can be changed so that a unit conversion if not possible, would return a null value. To do this, change the global variable UNITSFAILTONULL to true.

The following will give 1m as the result.

1m<>eor

1 m

UNITSFAILTONULL=true

1m<>eor

will now give null as the result.

UNITSFAILTONULL=false

1m<>eor

1 m

will be shown as the result.

Interesting Techniques

Long Variable Names can be used in the expressions, including units as given below.

##weight of zone=3m;

++(##weight of zone);

weightofzone+4;

Please note that ##weight of zone is the same as weightofzone.

Constants

Several useful constants are already defined in z^3, and can be accessed by prefixing % to the name of the constant. While doing this, you can simply give a few of the letters to indicate the constant, rather than the full name. These names can be space separated also.

For example:

%planck;

6.62607004081e-34 J s.

%boltzmann;

1.380648813e-23 J K-1.

%planck length;

1.61619997e-35 m.

To get a listing of all the CONSTANTS currently supported (along with units the numbers are represented in), simply give the command to z^3:

CONSTANTS()

speed of light in vacuum	299792458 m·s−1
speed of sound in dry air	343.2 m·s−1
newtonian constant of gravitation	6.6740831e−11 m3·kg−1·s−2
planck constant	6.62607004081e−34 J·s
reduced planck constant	1.05457180013e−34 J·s
magnetic constant vacuum permeability	1.256637061e−6 N·A−2
electric constant vacuum permittivity	8.854187817e−12 F·m−1
characteristic impedance of vacuum	376.730313461 Ω
coulomb's constant	8.987551787e9 N·m2·C−2
elementary charge	1.60217656535e−19 C
bohr magneton	9.2740096820e−24 J·T−1
conductance quantum	7.748091734625e−5 S
inverse conductance quantum	12906.403721742 Ω
josephson constant	4.8359787011e14 Hz·V−1
magnetic flux quantum	2.06783375846e−15 Wb
nuclear magneton	5.0507835311e−27 J·T−1
von klitzing constant	25812.807443484 Ω
bohr radius	5.291772109217e−11 m
classical electron radius	2.817940326727e−15 m
electron mass	9.1093829140e−31 kg
fermi coupling constant	1.1663645e−5 GeV−2
fine-structure constant	7.297352569824e−3
hartree energy	4.3597443419e−18 J
proton mass	1.67262177774e−27 kg
quantum of circulation	3.636947552024e−4 m2 s−1
rydberg constant	10973731.56853955 m−1
thomson cross section	6.65245873413e−29 m2
weak mixing angle	0.222321
efimov factor	22.7
atomic mass constant	1.66053892173e−27 kg
avogadro's number	6.0221412927e23 mol−1
boltzmann constant	1.380648813e−23 J·K−1
faraday constant	96485.336521C·mol−1
first radiation constant	3.7417715317e−16 W·m2
first radiation constant for spectral radiance	1.19104286953e−16 W·m2·sr−1
loschmidt constant	2.686780524e25 m−3
gas constant	8.314462175 J·K−1·mol−1
molar planck constant	3.990312717628e−10 J·s·mol−1
molar volume of an ideal gas at T=273.15K and p=100kPa	2.271095321e−2 m3·mol−1
molar volume of an ideal gas at T=273.15K and p=101.325 kPa	2.241396820e−2 m3·mol−1
sackur-tetrode constant at T=1 K and p=100kPa	−1.151707823
sackur-tetrode constant at T=1 K and p=101.325 kPa	−1.164870823
second radiation constant	1.438777013e−2 m·K
stefan–boltzmann constant	5.67037321e−8 W·m−2·K−4
wien displacement law constant	2.897772126e−3 m·K
conventional value of josephson constant	4.835979e14 Hz·V−1
conventional value of von klitzing constant	25812.807 Ω
molar mass constant	1e−3 kg·mol−1
molar mass constant of carbon-12	1.2e−2 kg·mol−1
standard acceleration of gravity (gee, free-fall on earth)	9.80665 m·s−2
gee	9.80665 m·s−2
standard atmosphere	101325 Pa
planck length	1.61619997e−35 m
planck mass	2.1765113e−8 kg
planck time	5.3910632e−44 s
planck charge	1.87554595641e−18 C
planck temperature	1.41683385e32 K

Switching Units On and Off

To switch on units based computation, in z^3 languages, the operators can be modified to be units aware simply wrapping it in <>. For example, <+> adds two values with units, in a units aware manner.

The command

units.on

also can be used to switch on the units mode, where + can automatically mean <+> until another line containing

units.off

is found.

For example,

units.on;
e:=m*%c^2;
units.off;
f:=m*%c^2;
[e(3kg),f(3kg)]

gives

269626553621045280kg.m2 .s-2 	269626553621045280

as result, which shows e is evaluated using units, and f is not.

MORE

/* THESE ARE BEING DOCUMENTED NOW */

(1..100)<>l<>ul

 Output: VALUE	1000000ul	2000000ul	3000000ul	4000000ul	5000000ul	and so on till 100000000ul

1Pa<>atm

 Output: 0.000009869232667160129atm

E:=(m<>kg)<*>(SPEEDOFLIGHT()<^>2); b=E(2g); ConvertToUnitOfNature(b,"energy")

 Output: 179751035747363.53kg.m2.s-2 for command b=E(2g);	
  But displays ConvertToUnitOfNature is not defined when used last command

CONSTANT("G") CONSTANT("G")<*>1kg<*>110kg</>(6000m<^>2) // did not work.

(CONSTANT("G")<*>1kg<*>110kg)</>((6000m)<^>2) // how to bracket the units to be inside and ignore < etc? // ## can be used to name variables with spaces in them. // the actual variable is named by removing the spaces. // otherwise it goes into code as it is.

//%G is gravitational constant GF:=%G*m1*m2/r^2; GF(1,2,300)

Output: 1.4831295777777778e-15

v:=u+%g*t; // this uses %g as default g value v(1,2)

 Output: 20.6133

PRINTCONVERSIONS()

     CONVERT()

A¹=34; A=[23,4,5,5]; /* no array indexing on subscript yet. Will decide on that later. */ A¹=[23,4,5,5] A¹[2]

a=%gravit; b=30<*>a

 Output: 2.00222493e-9m3.kg-1.s-2

a=%gravit; b=(1..10)<*>a

 Output: 6.6740831e-11m3.kg-1.s-2	1.33481662e-10m3.kg-1.s-2	2.0022249300000002e-10m3.kg-1.s-2	2.66963324e-10m3.kg-1.s-2	3.33704155e-10m3.kg-1.s-2	4.0044498600000004e-10m3.kg-1.s-2	4.67185817e-10m3.kg-1.s-2	5.33926648e-10m3.kg-1.s-2	6.006674790000001e-10m3.kg-1.s-2	6.6740831e-10m3.kg-1.s-2

E:=m<>kg<*>%c<^>2; E(1000kg) E(1000kg<>lbm) // - will gave same result as 1000kg E(1000lbm) //lbm is used for units of lb mass.

// %G<*>1kg<*>110kg(6000m<^>2) // %G<*>1kg<*>110kg((6000m)<^>2) // -did not work. Said 7.34149141e-9Nm3UNITPOWERUNITSOF %G<*>1kg<*>110kg<*>((6000m)<^>2)

%G<*>1kg<*>110kg</>((6000m)<^>2)

// make this work. 1..100 @> x.txt; // send output to a <@ x.txt; // read input from a;

1.3J<>GeV 1.3J<>eV

1J<>l.atm; // 0.0098692latm 1J<>(l.atm-1) // this should fail. and will keep original units. maybe safer. 1m2<>in2 1m²<>in²

10m2<>are 1m2<>are

100m2<>acre

E:=m<>kg<*>%c<^>2; b=E(1000kg)<>J

   c=b<>eV;

[b,c]

1..100.$("[SIN(x),COS(x),TAN(x)]") 1..100.$([SIN,COS,TAN]) worked. 1..100.$("[x,x^2,x^3,x^4,x^3+x^4,SIN(x)]") works 1..100.$("[SIN(x),COS(x),TAN(x)]") 1..100.$([SIN,COS,TAN]) x=SERIESOF("1/x",9,10) //this is to from in parameter sequence. x=SERIESOF("1/x",19,10) SERIESOF("1/x",10,5) x=SERIESOF "1/LOG(x,2)" 100 1 x=SERIESOF "1/log2x" 100 91 //removed: 1..10.$_([+,-]) 1..10.$_([SUM,MINUS]) //removed: 1..10.$_|+| EXPOF(5) [SIN,COS]@[1..100] 1..10.$_("+") 1..10.$_("+") 1..10@["+"] 1..10@"+"

(1..100)<>m<+>10cm

MAGICSQUARE(3).$$(SUM) MAGICSQUARE(3).$$$(SUM) MAGICSQUARE(3).$_(SUM)

a=1m<>mm<+>400km 1m<>eor // should give nothing as there is no such conversion. (((1..100)<>m)<^>2)<>are

(1..1000)<>$ (((1..100)<>m)<^>2)<>km2 // why chinese headers here?

(1..100)<>m<>cm

F=%G<*>100kg<*>10g</>((100km)<^>2);

1.3J<>GeV //check this

velocity=3<>(m/sec); time=1hr; velocity<*>time;

1(g.m)<>(mg.cm)

a=LAZYRANGE(1,100) a(1..100) // generate numbers in the range at that interval, without having to generate the array ahead of time. Useful in things like INTEGRALS etc. a() a=LAZYOBJECT(1,100,1000) // can even take a(0.1); a.islazyrange()

1(kg.m2s-2)<>(N.m) 1(kg.m2s-2)<>J 1(kg.m2s-2)<>(N) // also should work as we want to get rid of the /s here in this case. 1(kg.m2s-2)<>(N.m2) // should fail. 1(kg.m2s-2)<>(J/s) // should fail. 1(kg.m2s-3)<>(J/s) 1(kg.m2.s)<>(J/s) // should this fail? it works now.

12(g.m-1/s)<>(g.cm) // should fail. 12(g.m)<>(g.mm) // should not fail. 12(g.m)<>(g.cm) // should not fail.

12(g.m)<>(g.s) // should fail. original should be returned. 12(g.m)<>(g.mm) 12(g.m)<>(g.s) 12(g.m-1)<>(g.mm-1) 12(g.m-1/s)<>(g.cm-1) // converts, but this is ok, since /s on left sometimes we want to get rid off for some reason for using it on another calculation. Say N/s but you only want to use the N on it. 1(kg.m2/s2)<>e // how to make this conversion?

1(kg.m2/s2)<>J<>e

1.3(kg.m2/s2)<>Jo // would fail and original will be kept.

(((1..100)<>m)<^>2)<>are (1..100)<>are [1cm2,2m2]<>are %pi*34; %e; %avo;

q=1(mol/s); heat=%avo<*>q;

1Pa<>atm 1atm<>psi 1atm<>hPa

a=1<>(kg/m.s-2)<>Pa<>torr 1J<>BTU 1ly<>m 10ly<>m<>km

1atm<>inHg<>mmHg

1atm<+>1bar (1atm<+>1bar)<>atm 1km<>m<>lightyear

1lightyear<>km

1lightyear<>pc

1m<>ly

1km<>ly //seemed off. this is possibly correct. (1km<+>1ly)<>km

1Å<>km

1Å<>m

(1..100)<>AUNIT<>m

1degree<>arcminute

1Tsec<>sec

1(m/s)<>(km/hr) 1(km/s)<>(km/hr)

1(cal/mn)<>(J/sec) // d

1(kg/m3)<>(slug.ft-3)

2(rad/sec)<>rpm // did not convert. not sure why.

(1..100)<>USD<>EUR

SUPPORTEDUNITS()

1nibble<>bit 102400000000bit<>MB 1kB<>MB // seems wrong. 1kB<>Mb 1(kb)<>(bit) Pi<>(rad/sec)<>rpm 1(rad/sec)<>rpm 1(rad/mn)<>rpm (1(rad/mn)<>rpm)*2*Pi // should give 1. 1(rotation/mn)<>rpm 1(cycle/mn)<>(rad/mn)

1(cycle/mn)<>rpm

60rad<>deg 60rad<>deg<>rotation

1MB<>kB 1B<>kB 1MB<>B 1kB<>B

a=1(kg/m/s-2/t3) a=1(kg/m/s-2/t3) a=1(kg/m/s-2/t3) a=1(kg/m/s-2/t3) a=1<>(kg/m.s-2) // this worked though.

1(kg/m3)<>(slug/ft^3) // will not work due to ^. 1(kg/m3)<>(slug/ft3) //works 1(kg/m3)<>(slug.ft-3) //works

1(s-1)<>Hz 1(mn-1)<>Hz

velocity=3<>(m/s); time=1hr; velocity<*>time;

(((1..100)<>m)<^>2)<>acre

((1..100)<>m)<^>2

Units

Contents

How to specify units

Unit Prefixes

Conversion among Unit Systems

Units on Array of Values

Units inside functions

Units Aware Internal Functions

Generation of Arrays with Units

Currency Conversions

Array Unit Normalization

Unit Aware Logical Operations

Types of Supported Unit Conversions

Basic Conversions

Derived Conversions

Behavior on Unit Conversion Failures

Interesting Techniques

Constants

Switching Units On and Off

MORE

See Also

Navigation menu

Search