Manuals/calci/CIRCLE

CIRCLE(Xcoordinate, Ycoordinate, Radius)

CIRCLE (Width,Left,Top)

where,

• $Width$ represents the X coordinate point,
• $Left$ represents the Y coordinate point, and
• $Top$ represents the radius of circle.

CIRCLE() displays a circle for a specified radius from specified X and Y coordinates.

Description

CIRCLE (Width,Left,Top)

• Circles are simple closed curves which divide the plane into an interior and an exterior.
• $Width$ and $Left$ can be positive or negative.
• $Width$ and $Left$ can be omitted by using the function as CIRCLE(Radius).

Examples

1) =CIRCLE(30,50,200) : Displays a circle with X coordinate as '30', Y coordinate as '50' and radius '200'.

2) =CIRCLE(100) : Displays a circle with radius 100.

3) =ZC(1..50@CIRCLE) : Displays circles with radius 1,2,3...50 on a new Zcube.

4) =ZC(20..100..10@CIRCLE) : Displays circles in steps of 10 with radius 20,30,40...100 on a new Zcube.

Related Videos

CIRCLE

See Also

• SPHERE

References

• Circle

• List of Main Z Functions

• Z3 home