COT(x)
- where x is in Radians
- by default Calci use Radian as angle
DCOT can be used if the angle is in degrees.
The angle can be a single value or any complex array of values.
For example COT(1..100) can give an array of the results, which is the COT value for each of the elements in the array. The array could be of any shape.
Description
Consider x = 90 then =COT(RADIANS(90)) gives 1
- This function gives the Cotangent of 'x'.
- In a right angled triangle, COT = Adjacent Side / Opposite side or COS / SIN.
- By default, Calci takes the angle in Radians.
- To convert Degree to Radian, multiply with PI()/180 or we have to use the Degree function like DCOT(x)
The following example shows how TAN is applied to an array of numbers containing numbers 1..10.
1..10@TAN
| Number | TAN |
|---|---|
| 1 | 1.55740772465 |
| 2 | -2.18503986326 |
| 3 | -0.14254654307 |
| 4 | 1.15782128235 |
| 5 | -3.38051500625 |
| 6 | -0.29100619138 |
| 7 | 0.87144798272 |
| 8 | -6.79971145522 |
| 9 | -0.45231565944 |
| 10 | 0.64836082745 |
Examples
TAN(x)
- x is the angle in radians.
| TAN(Radian) | Value |
| TAN(0) | 0 |
| TAN(1) | 1.55740772465 |
| TAN(90) | -1.99520041221 |