# Manuals/calci/CIRCLE

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
CIRCLE (Width,Left,Top)

where,

• represents the X coordinate point,
• represents the Y coordinate point, and
• represents the radius of circle.
• CIRCLE(), are simple closed curves which divide the plane into an interior and an exterior. The circumference of a circle is the perimeter of the circle, and the interior of the circle is called a Area. An arc is any connected part of a circle.

## Description

CIRCLE (Width,Left,Top)

• Circles are simple closed curves which divide the plane into an interior and an exterior.
• and can be positive or negative.
• and can be omitted by using the function as CIRCLE(Radius).
• The circumference of a circle is the perimeter of the circle, and the interior of the circle is called a Area.
• An arc is any connected part of a circle.

## Examples

1) =CIRCLE(30,50,200) : Displays a circle with X coordinate as '30', Y coordinate as '50' and radius '200'.

2) =CIRCLE(100) : Displays a circle with radius 100.

3) =ZC(1..50@CIRCLE) : Displays circles with radius 1,2,3...50 on a new Zcube.

4) =ZC(20..100..10@CIRCLE) : Displays circles in steps of 10 with radius 20,30,40...100 on a new Zcube.

CIRCLE